
Medium Frequency Cast Iron Induction Furnace
Our medium frequency coreless induction furnaces are designed for melting cast iron, cast steel, iron, aluminum, alloy metals and other non-ferrous metals. The published furnace capacity range is 0.5–60 tons, with multiple rated power configurations. For cast iron melting, our documented 1-ton, 900 kW configuration provides specific performance and equipment specifications for evaluating production requirements.
Cast Iron Melting Applications
Our medium frequency induction furnaces are suitable for melting:
- Cast iron
- Cast steel
- Iron
- Aluminum
- Alloy metals
- Non-ferrous metals
A documented 1-ton furnace configuration also covers cast iron scrap melting applications.
Medium Frequency Induction Furnace Capacity and Power Options
We offer medium frequency induction furnace configurations with published capacities ranging from 0.5 to 60 tons.
The following capacity and rated power combinations are listed in our product specifications:
| Rated Capacity | Rated Power |
|---|---|
| 0.5 ton | 500 kW |
| 1 ton | 500 kW |
| 1 ton | 1,000 kW |
| 1.5 tons | 1,000 kW |
| 2 tons | 1,250 kW |
| 2 tons | 1,500 kW |
| 2 tons | 2,000 kW |
| 3 tons | 2,000 kW |
| 3 tons | 2,500 kW |
| 5 tons | 2,500 kW |
| 5 tons | 3,000 kW |
| 5 tons | 3,500 kW |
| 8 tons | 5,000 kW |
| 8 tons | 6,000 kW |
| 10 tons | 6,000 kW |
| 10 tons | 8,000 kW |
| 12 tons | 8,000 kW |
| 15 tons | 10,000 kW |
| 20 tons | 12,000 kW |
The published series capacity range extends to 60 tons. The table shows the specific capacity and power combinations currently listed in our product information.
1-Ton, 900 kW Cast Iron Induction Furnace
For buyers evaluating a smaller cast iron melting installation, our documented 1-ton medium frequency coreless induction furnace has the following specifications:
| Parameter | Specification |
|---|---|
| Rated capacity | 1 ton |
| Maximum capacity | 1.2 tons |
| Rated power | 900 kW |
| Operating frequency | 700 Hz |
| Melting temperature | 1,500–1,550°C |
| Melting rate | 1.5 tons/hour |
| Power consumption | 540 kWh/ton ±5% |
The melting rate is specified at rated 900 kW power, with a hot furnace from the second heat onward. The documented melting time is 40–50 minutes per heat.
The stated power consumption of 540 kWh/ton ±5% is based on standard pig iron melting conditions. It should not be treated as a guaranteed energy consumption figure for every cast iron material or operating condition.
Induction Furnace Power Supply and Cooling Specifications
The documented 1-ton, 900 kW configuration has the following electrical and cooling requirements:
| Parameter | Specification |
|---|---|
| Power supply voltage | 6 × 660 V |
| Rectification | 6-phase, 12-pulse |
| Operating frequency | 700 Hz |
| Maximum power factor | ≥0.95 |
| Furnace cooling water flow | 50 t/h |
| Power supply cooling water flow | 20 t/h |
| Cooling water inlet pressure | 0.2–0.4 MPa |
| Cooling water inlet temperature | 5–35°C |
| Cooling water outlet temperature | Below 55°C |
Furnace Body and Tilting Configuration
The same 1-ton, 900 kW model has the following structural and hydraulic specifications:
| Parameter | Specification |
|---|---|
| Furnace body | Steel shell |
| Tilting system | Hydraulic push rod |
| Maximum tilting angle | 95° |
| Hydraulic station capacity | 300 L |
| Hydraulic working pressure | 12 MPa |
| Furnace lining thickness | 90–120 mm |
| Induction coil copper tube wall thickness | 6 mm |
| Cable outlet direction | Rear or side |
Medium Frequency Induction Furnace Power Supply Options
We provide different power supply arrangements for induction furnace installations:
- Pure parallel power supply
- Rectifier-series parallel power supply
- Single power supply for one furnace
- One power supply for two furnaces
- One power supply for multiple furnaces
- Two power supplies for four furnaces
Our medium frequency power supply cabinets can also be customized according to project requirements. The final arrangement depends on the selected furnace and power supply configuration.
Manufacturing and Project Support
We are Xi'an Aobang Technology Co., Ltd., engaged in the research, development, manufacturing and supply of induction melting equipment.
Our supporting equipment range includes:
- Medium frequency power supplies
- Cooling towers
- Transformers
- Hydraulic pumping stations
- Induction coils
- Water-cooled cables
- Refractory materials
Our project support includes equipment installation, commissioning and operator training. Our overseas project experience also covers the supply of induction furnaces and associated auxiliary equipment for foundry installations.
Request a Cast Iron Induction Furnace Quotation
Send us your required furnace capacity, target melting output or existing equipment specifications. You can also share a specification sheet or equipment layout if available.
We will review your requirements and provide a suitable medium frequency cast iron induction furnace configuration, together with the corresponding power supply and auxiliary equipment options.
Hot Tags: medium frequency cast iron induction furnace, China medium frequency cast iron induction furnace manufacturers, suppliers, factory, Dual Output Induction Melting Furnace
Send Inquiry