
Induction Bar Heating Furnace
Our induction bar heating furnace solutions include configurations for bar-end heating and continuous billet reheating. Our documented projects include a 500 kW bar-end heating system for carburizing steel and chromium steel bars, and a 1,500 kW continuous reheating system for steel bars. We configure the equipment according to workpiece dimensions, target heating temperature and production requirements.
Bar Material and Size Compatibility
Our documented projects cover the following steel materials and workpiece dimensions.
| Project configuration | Workpiece material | Bar dimensions |
|---|---|---|
| 500 kW bar-end heating | Carburizing steel and chromium steel | Diameter: Φ45–70 mm |
| 1,500 kW continuous reheating | Steel bars | Diameter: Φ80/Φ90 mm; Length: 2,500–6,000 mm |
The 500 kW project uses an arrangement in which the bar end enters the induction coil for heating. The 1,500 kW project is designed for continuous steel bar reheating.
Heating Performance and Production Capacity
Our documented projects include different power and heating configurations.
| Project configuration | Rated power | Heating temperature | Production rate |
|---|---|---|---|
| Bar-end heating | 500 kW | 1,050–1,100°C | Not specified |
| Continuous bar reheating | 1,500 kW | 1,180°C ±20°C | 8 pieces/min |
| Steel bar heating | 3,000 kW | 1,250°C ±10°C | 2.5 pieces/min |
These figures belong to separate project configurations and should not be interpreted as a standard performance range for one furnace model.
Induction Power Supply and Equipment Configuration
Our published wire bar heating solution includes the following power supply specifications.
| Parameter | Configuration |
|---|---|
| Power supply type | Series-connected IGBT |
| Rated power | 250 kW |
| Operating frequency | 1–2 kHz |
| Power adjustment range | 5–100% |
| Input power supply | Three-phase, 380 V |
| Operating modes | Manual, semi-automatic and automatic |
| Bar travel speed | Adjustable from 0–100 mm/s |
The 250 kW configuration is a separate wire bar heating solution, not the power supply specification of the 500 kW project.
For the documented 500 kW bar heating project, the equipment package includes:
- Induction heating furnace with water distributor
- Material storage hopper and automatic feeding mechanism
- Feeding and roller conveying mechanisms
- Furnace frame with stainless steel water distribution components
- Rapid discharge mechanism
- Three-way temperature sorting system
- Infrared temperature measurement instrument
- PLC control system with touchscreen
- Four capacitor units and connecting copper busbars
Automatic Feeding and Temperature Control
Our documented 500 kW bar heating system integrates material handling, induction heating, temperature monitoring and sorting.
The operating sequence includes:
- Operators arrange bars of the same batch and specification and load them into the storage hopper.
- A hydraulic tipping mechanism transfers the bars to the feeding system.
- A stepped feeding mechanism and roller conveyor move the bars into the heating section.
- The induction heating system heats the bars to the specified process temperature.
- An infrared thermometer measures the bar temperature.
- The PLC-based control system adjusts output power according to the measured temperature.
- The discharge and sorting mechanisms separate bars into high-temperature, normal-temperature and low-temperature groups.
When the measured temperature is below the target, the control system increases output power. When the temperature is too high, it reduces output power.
Customization and Configuration Options
We configure induction heating equipment according to workpiece dimensions and production requirements.
- Induction coil: Coil length is designed according to workpiece dimensions. Changing workpiece specifications may require replacement of the corresponding heating element.
- Power supply: The documented 250 kW wire bar heating solution uses a series-connected IGBT power supply with a 5–100% power adjustment range.
- Operating mode: Manual, semi-automatic and automatic control modes are available in the documented 250 kW solution.
- Material handling: Feeding, conveying, discharge and temperature sorting mechanisms are included in the documented 500 kW production-line configuration.
- Temperature monitoring: Infrared temperature measurement and PLC-based temperature control are included in the documented 500 kW project.
Manufacturing and Project Support
We are Xi'an Aobang Technology Co., Ltd., established in 2001.
Our company has:
- Factory area: 10,000 m²
- Technical experts: 30
- Disclosed patent and certificate items: 79
- Production, technical, purchasing, quality inspection and warehousing departments
- Overseas installation, commissioning and after-sales service
- An after-sales service team of 30 engineers
We provide induction heating equipment manufacturing, installation and commissioning support for overseas industrial projects.
Request an Induction Bar Heating Furnace Quotation
Send us your bar material, diameter, length, required heating temperature and target production rate. You can also share workpiece photos or your existing production-line layout.
We will review your requirements and recommend a suitable induction bar heating furnace configuration and quotation.
Request a QuoteHot Tags: induction bar heating furnace, China induction bar heating furnace manufacturers, suppliers, factory, High Frequency Induction Annealing Machine
Send Inquiry